WELCOME TO KVERNELAND NEW ZEALAND

Kverneland Exacta TL GEOSPREAD

GPS Controlled Intelligent Machine Solutions

The Exacta TL GEOSPREAD is equipped with two actuators on each dosing unit. One of these actuators controls the setting of the discharge point of the dosing cup onto the disc (letter setting), the other controls the application rate. The GEOSPREAD system makes it possible to adjust the letter setting individually for both discs electrically from the tractor cab. This means the working width can be easily adjusted quickly and accurately just by touching the ISOBUS terminal!

 

KV Exacta TL GEOspread 007

Video

 

Advantages

GEOSPREAD System

When running IsoMatch GEOCONTROL in addition to GEOSPREAD you can set the Exacta CL and TL GEOSPREAD more accurately. The working width will be automatically adjusted to suit the overlap and coverage using a GPS positioning system. For example, when driving in a wedge or irregular shaped field, GEOSPREAD will start to decrease the working width step by step. GEOSPREAD is using the section control function of the IsoMatch Tellus software which is in the IsoMatch Tellus terminal. The spreader working width is divided into a minimum of 2 metre sections (max. 24 sections on TL GEOSPREAD and max. 14 sections on CL GEOSPREAD). Not only the spreading width is adjusted, the application rate (kg/min) is also adjusted automatically to match the revised spreading width. This unique combination of working width and application rate adjustment makes the GEOSPREAD system extremely accurate, with minimum influence on the spread pattern coefficient of variation.

KV Exacta TL GEOspread 003

CentreFlow Spreading System
  • No impact, no fragmentation, no dust: Central release point, smooth acceleration and centrifugal force accelerates fertiliser up to disc speed before it reaches the vane.
  • Accurate spreading pattern: A double overlap spreading pattern gives unrivalled accuracy. The 8 vanes per discs are ensuring a continous flow of fertiliser to the field. This is important for high capacity spreading and forward speed.
  • Minimal wind influence, maximum tolerance: Flat discs and a horizontal flow of fertiliser give a symmetrical spreading pattern.
  • Consistent spreading pattern: Eight vanes per disc, eight sectors per revolution give an equal distribution. Double overlap spreading pattern.
  • Guaranteed accuracy on slopes: guaranteed accuracy on slopes. The fertiliser always contacts the vanes at the same point, also on slopes and travels the complete length of the vane.

KV_exacta_0002.jpg

Weighing System
  • Continuous dynamic "online - calibration" with high frequency communication signal.
  • Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
  • Load cells in combination with the unique reference sensor:
    - Auto calibrating and continuous weighing system
    - Automatic correction on slopes
    - Automatic correction of shocks, even on rough terrain
    - Automatic speed related dosing system
    - No calibration test needed
  • Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality! 

KV_exacta_0053.jpg

EasySet: Easy Setting and Adjustment
  • The compact EasySet 'dashboard' gives you considerably simplified accurate setting and adjustment of applicaton rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
  • The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
  • The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The CentreFlow 6 step checklist helps you to ensure consistent accuracy in all field conditions
    1. Select fertiliser type
    2. Determine granule size and distribution
    3. Determine litre weight
    4. Select spreading table
    5. Select field settings
    6. Adjust EasySet system

KV_exacta_210

Border Spreading
  • Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the Exacta CL is also a tramline cylinder optional available.
  • With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
  • With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
  • The Border Spreading Indicator (BSI), indicates which border spreading device is active.

KV_exacta_206

Specifications

Exacta TL GEOSPREAD (wide)

TL 1875

TL 2550

TL 3225

TL 3900

Hopper capacity (l)

1875

2550

3225

3900

Filling height (cm)

120

139

158

177

Width (cm)

290

290

290

290

Filling width (cm)

284

284

284

284

Empty weight (kg)

705

735

765

795

Spread width (m)

12 - 45 (54)*

12 - 45 (54)*

12 - 45 (54)*

12 - 45 (54)*

Output (kg/min)

10 - 320

10 - 320

10 - 320

10 - 320